Request Estimate by Calling 800-864-7855
| Stationary Fuel Polishing Machines | Download Brochure |
Model 1175-4175’s use Ultimate Coalescing & Centrifugal Fuel / Water Separator housing
Step 1 Coalescing chamber: The fuel enters the filter housing and is forced down into the coalescing chamber where the fuel flows through very fine stainless steel mesh material where the small water droplets come together (Coalesce) as the fuel flows through the small opening in the mesh material. The heavier water droplets drop out of the fuel flow and settle to the bottom to be drained off. Water sight glasses are present to view the presence of water and a drain valve in also provided.
Step 2 Centrifugal chamber: This process occurs when the fuel exits the coalescing chamber and flows upward into the centrifugal chamber. The fuel flows through a stainless steel pipe and comes in direct contact with a stainless steel coned baffle spinning the fuel in a circular motion (Centrifugal force). This motion causes the heavier water droplets to fall out of the fuel flow to be drained off. Water sight glasses are present to view the presence of water and a drain valve in also provided.
Step 3 Depth-type filter chamber: After the fuel exits the centrifugal chamber it enter the filtration chamber, the 3-micron cellulose depth-type filter traps the majority of the solids particulates including: dirt, metal, bacteria, algae, microbes, and other solid contaminants. The filter also has water absorbing capabilities to remove free and emulsified water that was not removed in the first two steps. The depth-type filter has a very large water and contaminate holding capacity which means long filter life and high efficiency. Each filter can absorb up to 1 gallon of water and can hold 8-10 lbs of solids. Once the fuel is filtered it exists the filter housing through a stainless steel pipe ultra clean.
Pre-filter bag housing are available with all models to help protect the pump and extend filter element life
| Model | 1175-5-B-OF | 1175-10-B-ABB | 2175-20-B-ABB | 3175-30-ABB | 4175-40-ABB | 5175-54-ABB |
|---|---|---|---|---|---|---|
| Standard Gear Pump | 5 GPM | 10 GPM | 20 GPM | 30 GPM | 40 GPM | 54 GPM |
| Motor Horse Power | 1 HP | 1 HP | 1.5 HP | 1.5 HP | 2 HP | 3 HP |
| Standard Motor Voltages | 120VAC, 1 phase, 60HZ | 120VAC, 1 phase, 60HZ | 120VAC, 1 phase, 60HZ | 120VAC, 1 phase, 60HZ | 240VAC, 1 phase, 60HZ | 240VAC, 1 phase, 60HZ |
| 5-Micron Pre-Filter Bag Housing | Suffix-B | Suffix-B | Suffix-B | Suffix-B | Suffix-B | Suffix-B |
| ABB Motor Starter & Squre D Hi/lo Pressure Switch | Suffix-ABB | Suffix-ABB | Suffix-ABB | Suffix-ABB | Suffix-ABB No Hi/Lo switch | Suffix-ABB No Hi/Lo switch |
| Manual On/OFF Switch | Suffix-OF | Suffix-OF | Suffix-OF | Suffix-OF | Suffix-OF | Suffix-OF |
| Width | 12″ | 12″ | 12″ | 12″ | 12″ | 12″ |
| Height | 55″ | 55″ | 55″ | 55″ | 55″ | 55″ |
| Length | 40″ | 40″ | 48″ | 60″ | 88″ | 105″ |
| Approx. Dry Weight | 175 lbs | 195 lbs | 275 lbs | 375 lbs | 600 lbs | 700 lbs |
| Water Sight glass and Drain Valve | Included | Included | Included | Included | Included | Included |
| Fuel Replacement Element | #3914 | #3914 | #3914 | #3914 | #3914 | #3914 |
| Number of 3914 Filter Required | 1 | 1 | 2 | 3 | 4 | 5 |
| Element Dimensions | 7.5″ x 19.75″ | 7.5″ x 19.75″ | 7.5″ x 19.75″ | 7.5″ x 19.75″ | 7.5″ x 19.75″ | 7.5″ x 19.75″ |
| Element Micron Rating | 3 Micron | 3 Micron | 3 Micron | 3 Micron | 3 Micron | 3 Micron |
| Filter Performance per ISO 16889 | B3<(c)=150 | B3<(c)=150 | B3<(c)=150 | B3<(c)=150 | B3<(c)=150 | B3<(c)=150 |
| Filter Solid Holding Capacity | 8 to 10 lbs | 8 to 10 lbs each | 8 to 10 lbs each | 8 to 10 lbs each | 8 to 10 lbs each | 8 to 10 lbs each |
| Filter Water Holding Capacity | 1 gal. | 1 gal. | 2 gal. | 3 gal. | 4 gal. | 5 gal. |
| 5-Micron Bag Filter | #5005 | #5005 | #5005 | #5005 | #5005 | #5005 |
Smaller and larger systems are available.
Depth-type filtration is known to be the most efficient filtering technique. Great product for fuel cleanliness and price value.
