Ultimate Stationary Oil Recirculating Filtration Systems

Stationary Oil Recirculating Filtration Systems

Stationary Recirculating Systems With Pre-Filter Bag Housing Schematic

The fluid enters a 5-micron bag filter housing on the suction side of the pump to trap the larger solid particles. The pre-filter will help protect the pump against wear and extend the life of the 3-micron depth-type filter in the finishing housings. All of the PFS systems use cellulose depth-type filters to remove water and solid contaminates.

Stationary Recirculating Systems Without Pre-Filter Bag Housing Schematic

All of the PFS systems use cellulose depth-type filters to remove water and solid contaminates. The fluid is drawn out of the tank and flows through the pump and then into the PFS finishing housings were the cellulose depth-type filter absorbs water and traps solid particulates.

Application Photos

Models: 1075-5075’s Ultimate Coalescing Filtration Housing

Two step filtration process:

Step 1 Coalescing chamber: The oil enters the filter housing and is forced down into the coalescing chamber where the oil flows through very fine stainless steel mesh material where the small water droplets come together (Coalesce) as the oil flows through the small opening in the mesh material. The heavier water droplets drop out of the fluid flow and settle to the bottom to be drained off. Water sight glasses are present to view the presence of water and a drain valve in also provided.

Step 2 Depth-type filter chamber: After the oil exits the coalescing chamber it enters the filtration chamber, the 3-micron cellulose depth-type filter traps the majority of the solids particulates including: dirt, metal, bacteria, algae, microbes, and other solid contaminants. The filter also has water absorbing capabilities to remove free and emulsified water that was not removed in the first two steps. The depth-type filter has a very large water and contaminate holding capacity which means long filter life and high efficiency. Each filter can absorb up to 1 gallon of water and can hold 8-10 lbs of solids. Once the oil is filtered it exists the filter housing through a stainless steel pipe ultra clean. Model 8000F’s Do not use a coalescing chamber, the hydraulic fluid flows directly into the filter element to absorb free and emulsified water.

Pre-filter bag housing are available with all models to help protect the pump and extend filter element life

Model 2075

Products

Model: 2075-5-ABB-B

Specifications

Model	Model 8000F-FM	Model 1075-3-ABB	Model 2075-5-ABB	Model 3075-8-ABB	Model 4075-10-ABB	Model 5075-15-ABB
Coalescing Water Separation	No	Yes	Yes	Yes	Yes	Yes
Standard Gear Pump	3 GPM	3 GPM	5 GPM	8 GPM	10 GPM	15 GPM
Motor Horse Power	1 HP	1 HP	1 HP	1 HP	1 HP	1 HP
Standard Motor Voltages	120VAC, 1 phase, 60HZ	120VAC, 1 phase, 60HZ	120VAC, 1 phase, 60HZ	120VAC, 1 phase, 60HZ	120VAC, 1 phase, 60HZ	120VAC, 1 phase, 60HZ
Available Voltages	240, 1 phase 50/60 hz, or 240/480, 3 phase, 50/60 hz, or Explosion Proof or Pneumatic
Standard ABB Motor Starter and Square D Hi/Lo Pressure Switch	Included	Included	Included	Included	Included	Included
Width	12″	12″	12″	12″	12″	12″
Height	36″	55″	55″	55″	55″	55″
Length	12″	30″	42″	54″	66″	78″
Approx. Dry Weight	125 lbs	175 lbs	275 lbs	400 lbs	500 lbs	600 lbs
Tank Sizes	50-300 Gal.	50-300 Gal.	300-600 Gal.	600-900 Gal.	900-1500 Gal.	1500-2000 Gal.
Water Sight Glasses	NA	Included	Included	Included	Included	Included
Standard Drain	1/2″ NPT	1/2″ NPT	1/2″ NPT	1/2″ NPT	1/2″ NPT	1/2″ NPT
Water Removal Efficiency	99.90%	99.90%	99.90%	99.90%	99.90%	99.90%
Optional Items
5-Micron Pre-Filter Bag Housing	Suffix-B	Suffix-B	Suffix-B	Suffix-B	Suffix-B	Suffix-B
Number of Bag Housings Required	1	1	1	1	1	1

Filter Selection and Specifications

Filter #	Filter Dimensions	Micron Rating	Beta Rating	Water Capacity	Solids Capacity
3914	7″ x 19.75″	1-3 Micron	B3<(c)=1000	1 Gal.	8-10 lbs.
7534	7″ x 19.75″	1-3 Micron	B3<(c)=1000	1 Gal.	8-10 lbs.
7534	7″ x 19.75″	1-3 Micron	B3<(c)=1000	1 Gal.	8-10 lbs.
7534	7″ x 19.75″	1-3 Micron	B3<(c)=1000	1 Gal.	8-10 lbs.
7546	7″ x 19.75″	5-7 Micron	B7<(c)=1000	1 Gal.	8-10 lbs.
7548	7″ x 19.75″	12-15 Micron	B15<(c)=1000	1 Gal.	8-10 lbs.
3727	7″ x 19.75″	1-3 Micron	B3<(c)=1000	1 Gal.	8-10 lbs.
5005	7″ x 15″	5 Micron Nominal

3914 Cellulose Depth-Type Filter Media

Depth-type filtration is known to be the most efficient filtering technique. Great product for fuel cleanliness and price value.

cellulose-depth-type-filter-media

Axial flow between layers of media
Creped cellulose with interlocking layers to remove solids efficiently
High efficiency filtration with low micron levels (<1 micron)
Performance to B<3(c)=1000 (Per ISO16889)
Micron rating 1-3 micron is size
Very high solid holding capacity= 8-10 lbs per filter
Removes bacteria, algae, microbes, dirt, rust, and other solids
Can achieve very low ISO cleanliness levels
High water holding capacity= 1 gallon per filter
Will absorb free and emulsified water
Can maintain water levels to below 50ppm
Water efficiency 99.90%
Inexpensive high quality product
Long filter life: will last many times longer than conventional pleated paper filters
Most conventional filters will not remove water

How to Order a Stationary Oil Recirculating Filtration System

How to Order Stationary Recirculating Oil Filtration System